Dear all, I'm planning a vibration test in order to simulate a transportation af a trolley at a typical walking speed (1-6 km/h) over a road surface (I suppose an internal building floor is a less critical environment). Could anyone tell me where I can find a rationale to set the test parameters (acceleration amplitude and frequency spectrum, test duration)? I have the MIL STD 810 F curves for reference, but they seem to be not very appropriate for this particular application. thanks, Paolo ************************************************** Paolo Peruzzi Esaote S.p.A. Research & Product Development - Design Quality Control via di Caciolle, 15 I- 50127 Florence tel: +39 055 4229469 fax: +39 055 4229422 e-mail: [email protected] ************************************************** This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
