http://www.ieee-pses.org/symposium http://www.emc2004.org/ -------------------------------------------------- Neil, thank you very much for your reply. It will be helpful for me. I thought similarly about this. Regards
----- Original Message ----- From: Barker, Neil <mailto:[email protected]> To: 'Konrad Stefanski' <mailto:[email protected]> ; [email protected] Sent: Thursday, July 15, 2004 6:14 PM Subject: RE: EN 50270 http://www.ieee-pses.org/symposium http://www.emc2004.org/ -------------------------------------------------- Konrad, My interpretation of the scope of this standard is that it applies only to devices for the measurement or detection of gases and not to other types of device. However, it applies to all such instruments, not just those for use in potentially explosive atmospheres, although it does include those devices. Although it does not specifically say so, it would seem quite reasonable to apply it to devices for CO2 measurement. I hope this helps. Best regards, Neil R. Barker C.Eng. MIEE MIEEE MSEE Manager Compliance Engineering e2v technologies ltd 106 Waterhouse Lane Chelmsford Essex CM1 2QU UK Tel: +44 (0)1245 453616 Fax: +44 (0)1245 453410 e-mail: [email protected] Web: http://www.e2vtechnologies.com <http://www.e2vtechnologies.com/> From: Konrad Stefanski [mailto:[email protected]] Sent: 13 July 2004 19:56 To: [email protected] Subject: EN 50270 http://www.ieee-pses.org/symposium http://www.emc2004.org/ -------------------------------------------------- Dear Experts. Could You explain me the scope of EN 50270 (EMC harmonized) standard. This standard refers to devices which measures or detects gases (combustible, toxic, oxygen). 1. Paragraph two of scope of this standard tells that this standard contains requirements for devices used in explosive or potentially explosive atmosphere. So my question is: Does this standard refer only to gas measure devices used in explosive atmosphere or to all devices used in explosive atmosphere? For example: Devices which measures temperature or humidity in explosive or potentially explosive atmosphere. 2. Does this standard refer also to devices for carbon-dioxide (CO2) measurement ? ( I think that in some cases it would be recognized as toxic gas) ------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
