Just FYI. It also appears in the VCCI Documents - but that document doesn't directly relate back to the European requirements. Gary
From: Pettit, Ghery [mailto:ghery.pet...@intel.com] Sent: Tuesday, November 09, 2004 9:20 AM To: dan.ir...@sun.com Cc: Gordon,Ian; IEEE EMC-PSTC GROUP Subject: RE: 80/80 rule It's also mentioned in CISPR 22 / EN 55022, but the option of testing a single sample is also allowed. And the question was about where in the EMC Directive it is called out, and I don't see it anywhere in that document. Ghery From: DANIEL IRISH [mailto:dan.ir...@sun.com] Sent: Tuesday, November 09, 2004 9:17 AM To: Pettit, Ghery Cc: Gordon,Ian; IEEE EMC-PSTC GROUP Subject: Re: 80/80 rule All, This is specified in the following: CISPR 16-3 Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports CISPR/A/446/CD Addition to CISPR 16-3, Clause 2: Statistics; New sub clause 2.5: Rules for applying the statistical 80/80 rule and use of partial frequency ranges. However, I believe these are unratified standards, not listed in the Official Journal. Regards, Dan Pettit, Ghery wrote: > None that I can find. > > Ghery S. Pettit > > > -----Original Message----- > From: owner-emc-p...@listserv.ieee.org > [mailto:owner-emc-p...@listserv.ieee.org] On Behalf Of Gordon,Ian > Sent: Tuesday, November 09, 2004 7:59 AM > To: 'IEEE EMC-PSTC GROUP' > Subject: 80/80 rule > > All > Does anyone know which clause in the EMC directive calls for application > of > the "80/80 rule" during serial production? > > Ian Gordon > > *********************************************************************** > This email is confidential and intended solely for the use of the > individual to whom it is addressed. Any views or opinions presented are > solely those of the author and do not necessarily represent those of the > BOC Group plc or any of its affiliates. If you are not the intended > recipient, be advised that you have received this email in error and > that any use, dissemination, forwarding, printing, or copying of this > email is strictly prohibited. If you have received this email in error > please return the message to the sender by replying to it and then > delete the message from your computer. > > This footnote also confirms that this email message has been checked by > anti-virus software for the presence of computer viruses. However, the > BOC Group plc or any of its affiliates accepts no responsibility for any > virus or defect that might arise from opening this e-mail or > attachments. > > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to emc-p...@ieee.org > > Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Ron Pickard: emc-p...@hypercom.com > Scott Douglas emcp...@ptcnh.net > > For policy questions, send mail to: > > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to emc-p...@ieee.org > > Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Ron Pickard: emc-p...@hypercom.com > Scott Douglas emcp...@ptcnh.net > > For policy questions, send mail to: > > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc