With out quoting but to cover the majority, In the instance of a complaint or dispute, actual measured data will take precedence. Past data from the initial DoC will be reviewed and may be compared to new data taken at the site selected by the investigating Authority.
JOHN E. STUCKEY NCT EMC 002047 From: owner-emc-p...@listserv.ieee.org [mailto:owner-emc-p...@listserv.ieee.org] On Behalf Of C N Sent: Saturday, November 13, 2004 9:48 AM To: emc-p...@ieee.org Subject: RE: 80/80 rule Hi John and all, This particular quote I could interpret to mean that as long as I have some quality procedure in place which verifies that the production construction of said product is identical to what was tested, that that is sufficient and necessary for complaince and I don't need to do emissions testing. The quote below refers to " ... the manufacturing process ... ". Regards, Doug McKean >From: "John Allen" <john.al...@era.co.uk> > >This is very general and says that "The manufacturer takes all necessary >measures in order to ascertain that the manufacturing process ensures >compliance of the manufacturer's products with the applicable protection >requirements of the Directive as described in the declaration of >conformity." _________________________________________________________________ On the road to retirement? Check out MSN Life Events for advice on how to get there! http://lifeevents.msn.com/category.aspx?cid=Retirement This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc