Ian, Instrument Specialties in the US may have something.
Josh McBurney, Ian [Allen & Heath UK] wrote: > Dear colleagues; > > I hope that someone may have come across this problem before. > > I have a 19” card cage that has rf emissions radiating from the slots > between the front panels. By using a single horizontal strip of copper > tape across the front of the card cage I am able to reduce the emissions > considerably. > > My question is does anyone know of a component (like a short finger > strip) that can be mounted onto the front panels or circuit boards that > will bond the panels together. The bonding only needs to be in one or > two positions to half the wavelength of the emissions. > > However the cards must be able to be removed and replaced. > > Ian McBurney. > > Allen & Heath Limited. > > email: ian.mcbur...@allen-heath.com > > ***LEGAL DISCLAIMER: READ THIS FIRST*** > This Email and any files transmitted with it are confidential and > intended solely for the use of the individual to whom or the entity to > which they are addressed. If you have received this email in error > please notify the sender immediately. Please note that any views or > opinions presented in this email are those of the author and do not > necessarily represent those of Allen & Heath Limited. > This email has been checked for the presence of viruses using Sophos AV > Scanner. Anti-virus updates are downloaded on a daily basis . The > recipient should also check this email and any attachments for the > presence of viruses. Allen & Heath Limited accepts no liability for any > damage caused by any virus transmitted via this email. > *** > > ---------------------------------------------------------------- This > message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to emc-p...@ieee.org > > Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas emcp...@ptcnh.net Mike Mcantwell mcantw...@ieee.org > > For policy questions, send mail to: > > Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > -- Josh Wiseman CE Lab Manager, L F Research This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Mcantwell mcantw...@ieee.org For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
