Donald, If you intend to use it under software control, it is not very good. You must do many things manually, including switching ranges. At most you can use software to capture scans and apply cable and antenna factors. Bob Richards. Square D.
Donald McElheran <dmcelhe...@rossvideo.com> wrote: All: I am considering the purchase of a HP 8569B Spectrum analyzer for pre-compliance radiated emission measurements beyond 1GHz. The unit is a very reasonably price and would appear to be satisfactory for pre-compliance requirements. Intend to configure the SA with a Low noise 1 GHz - 18 GHz pre-amp and 1-18 GHz horn antenna. Wondering if any one on the forum had any experience with this particular SA and whether or not there are any issue which we should consider or be cautious of. Donald MCElheran Product Compliance ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
