Donald
I think you need to look at warranty ,current calibration and the possibility
of it having to be repaired.  This sounds like an older unit so will it used
at one station or will it be moved about? I think it would be hard to get
repaired so if it isn't going to be moved about then you probably have a
solution.  If its a mobile unit then you should probably invest in something a
little newer. 
Just my own thoughts of caution.
Dan Anchondo
Vivotech,Inc
 


From: owner-emc-p...@listserv.ieee.org 
mailto:owner-emc-p...@listserv.ieee.org]On Behalf Of Donald McElheran
Sent: Wednesday, February 23, 2005 7:24 AM
To: emc-p...@ieee.org
Subject: Radiated Emissions > 1GHz



All: 

I am considering the purchase of a HP 8569B Spectrum analyzer for
pre-compliance radiated emission measurements beyond 1GHz. The unit is a very
reasonably price and would appear to be satisfactory for pre-compliance
requirements.  Intend to configure the SA with a Low noise 1 GHz - 18 GHz
pre-amp and 1-18 GHz horn antenna. 

Wondering if any one on the forum had any experience with this particular SA
and whether or not there are any issue which we should consider or be cautious
of.


Donald MCElheran 
Product Compliance 
  


   



---------------------------------------------------------------- This message
is from the IEEE Product Safety Engineering Society emc-pstc discussion list.
Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to emc-p...@ieee.org 


Instructions: http://listserv.ieee.org/listserv/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org 


For policy questions, send mail to: 


Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc

---------------------------------------------------------------- This message
is from the IEEE Product Safety Engineering Society emc-pstc discussion list.
Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to emc-p...@ieee.org 


Instructions: http://listserv.ieee.org/listserv/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org 


For policy questions, send mail to: 


Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc 


Reply via email to