Hello For devices intended to use in industrial envvronment (Industrial data logger) - 10V/m is required, according to Amendment 1 to EN 61326.
Regards Konrad ----- Original Message ----- From: "Piotr Galka" <[email protected]> To: "EMC-PSTC" <[email protected]>; "Kozinski, Gary (GE - Infrastructure)" <[email protected]> Sent: Tuesday, June 07, 2005 12:08 PM Subject: Re: EN 61326 Deviation > Hi Gary, > > I have no big experience in EMC but in my opinion: > If you selected 61326 for your device then you can test 61000-4-3 to 3V/m > (Table > 1). > > Regards > > Piotr Galka > > > ----- Original Message ----- > From: "Kozinski, Gary (GE - Infrastructure)" <[email protected]> > To: <[email protected]> > Sent: Tuesday, May 31, 2005 10:34 PM > Subject: EN 61326 Deviation > > >> Table 2 of EN 61326-1:1997 states if you cannot meet Criteria A, you can >> fall > back on Criteria B or C provided that both the (product) specification and > test > report highlight such deviation for the relevant combination of function > and > test. >> >> Given Industrial data logger, 61000-4-3 requires 10v/m, the product at >> some > frequencies fails to collect and/or looses data. >> >> Question: If the deviation is written into the DoC which is included in >> the > product manual that includes product specifications; then, can you say > the > deviation is stated? >> >> OR, must the deviation be clearly stated in product specifications (Such >> as on > data sheets and/or within product manuals)? >> >> Thanks for your opinions. >> >> Gary >> > > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
