Dear Anders,
I would like to suggest you to contact our certification manager Mark Koop [email protected] he can inform you about the exact channels for Japan. He issues type approvals for this kind of equipment for Japan. With Kind Regards Henry Rutjes Manager Sales & Liaison * Telefication bv Edisonstraat 12 A 6902 PK Zevenaar The Netherlands * + 31 316 583 180 * + 31 316 583 137 * + 31 651 182 400 * [email protected] * http://www.telefication.com/ VOIP: hrutjes@telefication via skype _____ From: Anders Svensson B (LI/EAB) [mailto:[email protected]] Sent: maandag 13 februari 2006 8:19 To: Lothar Schmidt; Marko Radojicic Cc: [email protected] Subject: RE: Japan requirements Thanks, Lothar and Marko thanks for the information! Any link where I can find the specifications? Anders Svensson _____ From: Lothar Schmidt [mailto:[email protected]] Sent: den 11 februari 2006 00:13 To: Marko Radojicic; Anders Svensson B (LI/EAB); [email protected] Subject: RE: Japan requirements Channel 14 has other specifications and a lower power. Lothar Schmidt Technical Manager EMC, SAR, Antenna testing and BQB CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 Phone +1 408 586 6214 Fax +1 408 586 6299 This e-mail may contain proprietary, privileged and confidential information for the sole use of the named intended recipient. Any review or distribution of this e-mail by any party other than the intended recipient or that person's agent is strictly prohibited. If you are not the intended recipient, please delete all copies and immediately Contact the sender. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient. Thank you. _____ From: [email protected] [mailto:[email protected]] On Behalf Of Marko Radojicic Sent: Friday, February 10, 2006 9:07 AM To: Anders Svensson B (LI/EAB); [email protected] Subject: RE: Japan requirements Anders, For Japan: - Channels 1-13 are allowed for 11b and 11g - Channel 14 is only allowed for 11b …Marko _____ From: [email protected] [mailto:[email protected]] On Behalf Of Anders Svensson B (LI/EAB) Sent: Friday, February 10, 2006 1:24 AM To: [email protected] Subject: Japan requirements Dear experts, Anyone who knows the following? Is now channels 1-14 (2400 - 2483.5 MHz) allowed to use in Japan for a 802-11 b and g device? (I think it was only channel 14 that was allowed earlier). Regards Anders Svensson - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
