On 9/12/2006, Bob Zmudka wrote:
Can anyone in the group recommend a lab that is set up to perform the 600 V, 16 2/3 Hz power induction tests called out in ITU Recommendation K.21? Hi Bob: Is there a specific reason that you want to perform the test at 16-2/3 Hz? The requirements in K.21 allow you to perform the tests using 60 Hz, 50 Hz, *or* 16-2/3 Hz. You can use any of these three frequencies for the test. Most labs are set up to use either 50 Hz or 60 Hz, depending on the AC mains frequency used in the country where they are located. Joe Randolph Telecom Design Consultant Randolph Telecom, Inc. 781-721-2848 (USA) j...@randolph-telecom.com http://www.randolph-telecom.com <http://www.randolph-telecom.com/> ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
