Hello All, Can anyone in the group recommend a lab that is set up to perform the 600 V, 16 2/3 Hz power induction tests called out in ITU Recommendation K.21? Thanks in advance. Regards,
Bob Zmudka Siemens Subscriber Networks, Inc. 4849 Alpha Road Dallas, TX, USA 75244 Tel: 972-759-2542 Fax: 972-852-1001 mailto:[email protected] The information contained in this e-mail is intended only for the use of the recipient named above. This e-mail may contain privileged, confidential or undisclosed information. If the reader of this e-mail is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this e-mail in error, and that any review, dissemination, distribution or copying of it is strictly prohibited. If you have received this e-mail in error, please contact the sender and delete the message and any attachment from your system. Thank you for your cooperation. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
