Hi All, thanks to JOhn, I found exactly what I needed: http://www.viewpoint.com/installer/inde .html?05.00.02.05|frame&http://www.l-com.com/item.aspx?id=2678 <http://www.l-com.com/item.aspx?id=2678&View=3D> &View=3D
Thanks John, everyone that replied. Cheers, Derek. John Cochran wrote on 9/12/2006, 3:26 PM: Bulgin makes a bulkhead connector that is superior to anything else I had tried. Of course, I need waterproof connectors (IP68), so that limits the field. The Bulgin part is PX0833/E with the ground wire. John Cochran _____ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Derek Walton Sent: Tuesday, September 12, 2006 4:13 PM To: IEEE EMC Discussion Group Subject: Ethernet bulkhead HI All, I've been looking for a bulkhead ethernet connector that will terminate a shielded cable. I've found a whole bunch of plain old connectors, but I'm trying to avoid making an adaptor. Note, this is for passing the signal out of a shield room, it's not intended for deployment. Can anyone point me to something I could use please? Thanks, Derek Walton - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc