In message <000501c793dd$cf153ec0$d600a...@tamuracorp.com>, dated Fri, 
11 May 2007, Brian O'Connell <oconne...@tamuracorp.com> writes:

>The band-pass response required by fig C.1 should be relatively simple 
>by use of a 'window' on the frequency-domained data.

I don't think that is the optimum approach for a simple safety test.
>
>I have some problems with this std's concept of pink noise. The std 
>specs a crest factor = 3, but the concept of crest factor for pink 
>noise does not make sense because of the start freq and delimited 
>runtime.

You mean that you can't measure the peak value and the r.m.s. value and 
take the ratio? Why not?

>Also, for electrical stuff, there is no low-end delimiter to the pink 
>noise freq range.

That's one of the effects of the filter.
>
>In any case, a decent discussion on pink noise, response requirements, 
>and DSP technique can be found at <www.firstpr.com.au/dsp/pink-noise>.

Again, I think this is overkill in the context of a safety test.
-- 
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
There are benefits from being irrational - just ask the square root of 2.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to emc-p...@ieee.org

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           emcp...@ptcnh.net
     Mike Cantwell           mcantw...@ieee.org

For policy questions, send mail to:

     Jim Bacher:             j.bac...@ieee.org
     David Heald:            emc-p...@daveheald.com

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Reply via email to