Hi All, This is a new topic for me so please pordon the dumb questions Is there a test method for showing compliance with the limit? It seems a perfect application for a small mode stirred chamber.... Thanks, Derek Walton L F Research
----- Original Message ----- From: Haynes, Tim (SELEX) (UK Capability <mailto:tim.hay...@selex-sas.com> Green) To: Scott Xe <mailto:scott...@gmail.com> ; emc-p...@ieee.org Sent: Thursday, September 20, 2007 10:01 AM Subject: RE: Microwave leakage Scott, You might try relating the leakage level to the public exposure level of the ICNIRP recommendations. I believe that the exposure limit is 1mW/cm2 and would suggest looking at the possibility that the user may stay near the unit for 6 minutes or more. I am not sure of the basis for the 5mW/cm2 under EN 60335-2-25 as it is not a specification I use. Regards Tim 6239 desk A1S77 P Please consider the environment before printing this email. _____ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Scott Xe Sent: Wednesday, September 19, 2007 4:11 PM To: emc-p...@ieee.org Subject: Microwave leakage *** WARNING *** This mail has originated outside your organization, either from an external partner or the Global Internet. Keep this in mind if you answer this message. According to EN 60335-2-25, the limit is 5mW/cm2 for type test. Is there any other limit for the life span of microwave oven? Thanks and regards, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ******************************************************************** - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
