Mr Woodgate,

I have noted a CTL decision for IEC 60335-1 that seems to indicate that
CECC 42200 certification is also acceptable. Also applicable to 60950-1 ?

Also, I am looking a the spec sheets for several IEC 61051-x certified
MOVs and have noted that the rated voltages do not seem to correspond to
the 120% requirement. Did the answer to the below question provide some
insight into this requirement ?

Thanks much.

R/S,
Brian

 > -----Original Message-----
 > From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of John
 > Woodgate
 > Sent: Monday, October 01, 2007 1:25 PM
 > To: emc-p...@ieee.org
 > Subject: Re: EN 60950:2006 VDR's
 >
 >
 > In message <004801c8040a$f04818e0$0800a8c0@BEMCSRLAP>, dated
 > Mon, 1 Oct
 > 2007, "Steve Richardson, Blackwood Labs"
 > <srichard...@blackwood-labs.co.uk> writes:
 >
 > >So if a product is rated 230V then 120% is 276V which
 > implies that a
 > >varistor rated at 420V should be used???
 > >
 > >Can anybody shed any sense on this?
 >
 > I'm passing this to a UK person of influence on IEC 60950-1. He may
 > reply directly to you, because I shall be travelling for
 > several days.
 > --
 > OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
 > There are benefits from being irrational - just ask the
 > square root of 2.
 > John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to emc-p...@ieee.org

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           emcp...@ptcnh.net
     Mike Cantwell           mcantw...@ieee.org

For policy questions, send mail to:

     Jim Bacher:             j.bac...@ieee.org
     David Heald:            emc-p...@daveheald.com

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

______________________________________________________________________
This e-mail has been scanned by MCI Managed Email Content Service, using
Skeptic(tm) technology powered by MessageLabs. For more information on MCI's
Managed Email Content Service, visit http://www.mci.com.
______________________________________________________________________

Reply via email to