Hi Alan, >From EN 50149:2006 you can read that the line underneath must be: Quote: "The height (h) of the bar shall be the greater of 0.3 a or 1mm."
Where a is the height from bottom of trash bin to the hinge of the lid, refer to drawings. Best regards Peter ----- Original Message ----- From: "Alan Shaw" <as...@napcosecurity.com> To: <emc-p...@ieee.org> Sent: Tuesday, March 18, 2008 10:40 PM Subject: RE: wheeled bin symbol > I've often wondered why some graphics have a big thick line > under the bin? I have a page from the OJ dated 13.2.2003 has only a thin > line underneath that is consistent with document formatting of a section > break. Therefore, I've never incorporated the line into artwork that > I've used. > > > > Alan > > -----Original Message----- > From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Peter > Sent: Tuesday, March 18, 2008 5:10 PM > To: emc-p...@ieee.org > Subject: Re: wheeled bin symbol > > Hi Brian, > > As many have already stated, you should read EN 50419 standard and of > course the directive itself. > However if youre looking for the graphics you might find the below link > usefull (though not authoritative) > > http://www.conformance.co.uk/logos/wheelie_bin/wheeliebin_logo.php > > Best regards > Peter > > > ----- Original Message ----- > From: "Brian O'Connell" <oconne...@tamuracorp.com> > To: <emc-p...@ieee.org> > Sent: Tuesday, March 18, 2008 4:16 PM > Subject: wheeled bin symbol > > >> Good People, >> >> I have noted that the X'd wheeled-bin symbol, as indicated in the >> WEEE directive, is a bit different from the what is used by >> industry. >> >> Could someone please point me to an authoritative URL to define >> this graphic ? >> >> Thanks much. >> >> luck, >> Brian >> >> - >> ---------------------------------------------------------------- >> This message is from the IEEE Product Safety Engineering Society >> emc-pstc discussion list. Website: http://www.ieee-pses.org/ >> >> To post a message to the list, send your e-mail to emc-p...@ieee.org >> >> Instructions: http://listserv.ieee.org/request/user-guide.html >> >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> >> Scott Douglas emcp...@ptcnh.net >> Mike Cantwell mcantw...@ieee.org >> >> For policy questions, send mail to: >> >> Jim Bacher: j.bac...@ieee.org >> David Heald: emc-p...@daveheald.com >> >> All emc-pstc postings are archived and searchable on the web at: >> >> http://www.ieeecommunities.org/emc-pstc > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to emc-p...@ieee.org > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas emcp...@ptcnh.net > Mike Cantwell mcantw...@ieee.org > > For policy questions, send mail to: > > Jim Bacher: j.bac...@ieee.org > David Heald: emc-p...@daveheald.com > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to emc-p...@ieee.org > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas emcp...@ptcnh.net > Mike Cantwell mcantw...@ieee.org > > For policy questions, send mail to: > > Jim Bacher: j.bac...@ieee.org > David Heald: emc-p...@daveheald.com > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
