Whom is "they"? -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Doug Kramer Sent: Monday, June 06, 2011 6:18 AM To: [email protected]; T.Sato Subject: RE: LED Lighting Fixtures
I asked them about some noisey LEDs too (over Part 15 class B limits, within Ux of Class A limits), and they did not regard them as Part 15 either. -Doug -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of T.Sato Sent: Friday, June 03, 2011 7:32 PM To: [email protected] Cc: [email protected] Subject: RE: LED Lighting Fixtures On Fri, 3 Jun 2011 13:40:04 -0600, "Chris Anderson (cmanderson)" <[email protected]> wrote: > My understanding is to use FCC Part 15. A lot of people default to Part > 18, but Part 18 refers to RF lighting and LEDs are not RF lighting. The Some LED lightings use RF PWM to drive LEDs and those LEDs will be driven by RF current, and some may think them as "RF lighting" in a broad sense. I asked FCC about this topic, and the answer was that LED lightings would not be regarded as Part 18 device even if it use RF PWM to drive the LEDs. Regards, Tom -- Tomonori Sato <[email protected]> URL: http://homepage3.nifty.com/tsato/ > From: [email protected] [mailto:[email protected]] On Behalf Of Steve > O'Steen > Sent: Friday, June 03, 2011 1:21 PM > To: [email protected] > Cc: [email protected] > Subject: LED Lighting Fixtures > > > > I'm interested in any comments regarding the appropriate EMC > requirements for an LED Lighting Fixture for use in North America. > Would this default to FCC 47CFR Part 18 or is there a place for it in > Part 15? - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
