The GB standards are for mainland China. The CNS standards are for Taiwan. ANSI does not have many Taiwanese standards. BSMI is the best place to get it, but their web site isn't working properly right now. (At least the English section is not.) CE Magazine does have an old comparison between the Taiwan standard and CISPR 22 that may help. http://www.ce-mag.com/archive/1999/novdec/Lin.html Ted Eckert The opinions expressed are my own and do not necessarily reflect those of my employer.
--- On Tue, 8/12/08, Knighten, Jim L <jim.knigh...@teradata.com> wrote: From: Knighten, Jim L <jim.knigh...@teradata.com> Subject: RE: Copies of CNS standards To: emc-p...@ieee.org Date: Tuesday, August 12, 2008, 4:28 PM I did a quick search on the ANSI web site for "Chinese GB", as suggested. I got 1500 hits, but could not find CNS 13438 and all documents I browsed through (not all 1500) were in Chinese language, which is of no help to me. Jim James L. Knighten, Ph.D. EMC Engineer Teradata Corporation 17095 Via Del Campo San Diego, CA 92127 858-485-2537 - phone 213-337-5432 - fax -----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Brian O'Connell Sent: Tuesday, August 12, 2008 2:11 PM To: emc-p...@ieee.org Subject: RE: Copies of CNS standards For the ANSI webstore, did you look under "Chinese GB" ? About 15 months ago I bought a Chinese std from ANSI - so do not know what changed. I just visited the cnsonline and bsmi.gov.tw sites and got a multitude of 404 errors, and a 301 (moved). Also, perhaps Grace Lin could advise, as she once wrote an article on comparing this std to CISPR. -----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Knighten, Jim L Sent: Tuesday, August 12, 2008 1:20 PM To: emc-p...@ieee.org Subject: RE: Copies of CNS standards Charles, I found acquisition of CNS 13438 to be difficult. Couldn't find it on the ANSI site. To purchase from cnsonline, you must purchase a HiTech prepaid card and that was the difficult part for us. The web site was difficult. We finally got our in-country rep. to get it for us. They said the website was too difficult and they went down to the BSMI office, purchased a paper copy, scanned it and sent it by e-mail. Good luck. Jim James L. Knighten, Ph.D. EMC Engineer Teradata Corporation 17095 Via Del Campo San Diego, CA 92127 858-485-2537 - phone 213-337-5432 - fax -----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Brian O'Connell Sent: Tuesday, August 12, 2008 10:47 AM To: emc-p...@ieee.org Subject: RE: Copies of CNS standards may not be safe for some browsers - www.cnsonline.com.tw/en/ also, ANSI has CNS - http://webstore.ansi.org -----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Grasso, Charles Sent: Tuesday, August 12, 2008 10:25 AM To: emc-p...@ieee.org Subject: Copies of CNS standards Hello list members, Where can I buy copies of the CNS standards? Best Regards Charles Grasso - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc