Hello Grace,
 
I can elaborate a little on Mr. Woodgate's comments.  I did two quick checks. 
The CB Scheme web site shows no national deviations to IEC 62133.  Also, the
DKE web site indicates that DIN EN 62133 is just the German translation of IEC
62133 and indicates no national deviations other than referencing EN standards
instead of IEC standards.
 
These two checks alone may not be sufficient to guarantee that there are no
national differences, but it give a higher level of confidence that design
decisions based off of the IEC standard will be sufficient for products sold
in Europe.
 
Ted Eckert
The opinions expressed are my own and do not necessarily reflect those of my
employer.


--- On Tue, 8/26/08, Grace Lin <graceli...@gmail.com> wrote:


        From: Grace Lin <graceli...@gmail.com>
        Subject: EN 62133
        To: emc-p...@ieee.org
        Date: Tuesday, August 26, 2008, 12:15 PM
        
        
        Dear Members,
         
        Is EN 62133: 2003 identical to IEC 62133: 2002?  Is it an EU harmonized
standard?  If yes, which directive is this standard being categorized to?
         
        Thank you and look forward to your help.
         
        Best regards,
        Grace Lin
        - ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 
        To post a message to the list, send your e-mail to emc-p...@ieee.org 
        Instructions: http://listserv.ieee.org/request/user-guide.html 
        List rules: http://www.ieee-pses.org/listrules.html 
        For help, send mail to the list administrators: 
        Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org 
        For policy questions, send mail to: 
        Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com 
        All emc-pstc postings are archived and searchable on the web at: 
        http://www.ieeecommunities.org/emc-pstc 

        - ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

        To post a message to the list, send your e-mail to emc-p...@ieee.org 

        Instructions: http://listserv.ieee.org/request/user-guide.html 

        List rules: http://www.ieee-pses.org/listrules.html 

        For help, send mail to the list administrators: 

        Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org 

        For policy questions, send mail to: 

        Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com 

        All emc-pstc postings are archived and searchable on the web at: 

        http://www.ieeecommunities.org/emc-pstc 


Reply via email to