Hi, The test site validation is specified in CISPR 16-1-4 2nd Edition from 2007-02.
Regards, Ari Honkala SGS Fimko Ltd Finland ________________________________ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Flavin, John Sent: 29. lokakuuta 2008 6:20 To: emc-p...@ieee.org Subject: Radiated Emission Measurements above 1GHz We have copies of AS/NZS CISPR 22:2006 and CNS 13438:2006, both of which show radiated emission limits in the range 1-6GHz. Both reference CISPR 16-1-4 for the description of the test site. (Our copy of EN55022:2006 does not show any such limits.) A few questions: Has the CISPR test site for > 1GHz been decided? Has the validation method for the site been decided? If the test site or site validation method is still not settled, how does one test to the limits shown in these two standards? John D. Flavin Teradata TCP Engineering 17095 Via del Campo San Diego, CA 92127 john.fla...@teradata.com V: (858) 485-3874 F: (213) 337-5432 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Finally, the recipient should check this email and any attachments for the presence of viruses. The Company accepts no liability for any damage caused by any virus transmitted by this email. All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/terms_and_conditions.htm - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc