I guess all that English lit they made us read was that old... My mistake on the numbers, but the field intensity vs. power density definitions are as I stated on the west side of the Pond.
In fact over here we state the definition of the Poynting vector as: Power density (W/m^2) = electric field intensity x magnetic field intensity, Where "x" denotes vector cross-product. Ken Javor Phone: (256) 650-5261 > From: John Woodgate <j...@jmwa.demon.co.uk> > Date: Mon, 1 Dec 2008 17:07:00 +0000 > To: <emc-p...@ieee.org> > Subject: Re: EMI Receiver > > In message <c5597135.328a7%ken.ja...@emccompliance.com>, dated Mon, 1 > Dec 2008, Ken Javor <ken.ja...@emccompliance.com> writes: > > >> This may be one of those usage differences that occur on opposite sides >> of the Pond. After all, what we in the USA call a billion, you call a >> milliard, and what you mean by a billion is what we call one trillion. > > No, we don't! 'Milliard' hasn't been used in UK for about 100 years, and > we now (most of us, even the BBC!) use billion = 10^9. > -- > OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk > Either we are causing global warming, in which case we may be able to stop it, > or natural variation is causing it, and we probably can't stop it. You choose! > John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <emcp...@ptcnh.net> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher: <j.bac...@ieee.org> > David Heald: <dhe...@gmail.com> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>