Yes, comprehensive is good word to use there, but over zealous would also fit >from past experiences.
Best regards, Ron Pickard RPQ Consulting Glendale, AZ 85303 +623.512-3451 tel, +623.848-9033 fax rpick...@rpqconsulting.com www.rpqconsulting.com <http://www.rpqconsulting.com/> www.linkedin.com/in/RonPickard ________________________________ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of brian_mcauli...@dell.com Sent: Tuesday, January 19, 2010 3:18 AM To: pmerguerian2...@yahoo.com; emc-p...@ieee.org; jim.knigh...@teradata.com Subject: RE: lables for Turkey Jim As per Peter’s comment - best place it on the product AND the packaging. Be aware that you will also most likely be required to mark the packaging/crate with the name/address details of the company importing the product. Also, from our experience if the consignment does not originate in the EU (I think it’s an ‘ATR’ document that shows this), then it is usually subject to a more comprehensive inspection regime. Rgds Brian Brian McAuliffe Global Regulations & Standards, Dell Inc direct: 353-61-465096 e: brian_mcauli...@dell.com From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of peter merguerian Sent: 19 January 2010 02:48 To: emc-p...@ieee.org; Jim LKnighten Subject: Re: lables for Turkey Jim, I assume the CE Mark logo. Just as in the EU, best place to put is on the product itself (can be on the inside door) and highly recommended on the packaging (some customs officers have opened packages looking for the CE Mark). Best Regards, Peter --- On Mon, 1/18/10, Knighten, Jim L <jim.knigh...@teradata.com> wrote: From: Knighten, Jim L <jim.knigh...@teradata.com> Subject: lables for Turkey To: emc-p...@ieee.org Date: Monday, January 18, 2010, 10:25 AM I am trying to clarify requirements for shipping ITE product into Turkey. I am not clear as to where to put the label for Turkey. I had originally thought that placing the label on the shipping crate was proper, but now I am getting feedback that it should be on the inside of the door of our rack-based product. Can someone shed light on the requirement, or what you are doing with your products? Thanks, Jim __________________________ James L. Knighten, Ph.D. EMC Engineer Teradata Corporation 17095 Via Del Campo San Diego, CA 92127 858-485-2537 – phone 858-485-3788 – fax (unattended) - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@socal.rr.com> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@socal.rr.com> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> Dell Products Manufacturing Limited is registered in Ireland. Company Registration Number: 427761 Registered address: 70, Sir Rogerson’s Quay, Dublin 2, Ireland. WEEE Directive Registration Number: 000358 An up-to-date list of the name of every company director containing the particulars indicated in paragraphs (a), (b) and (c) of Section 196 (1) of the Companies Act 1963, is available on application from the company’s registered office - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@socal.rr.com> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>
