It's relevant to understand between vertically polarized waves that have a 180 degree phase shift on reflection, and horizontally polarized waves that do not.
Regards, Ing. Gert Gremmen, BSc g.grem...@cetest.nl www.cetest.nl Kiotoweg 363 3047 BG Rotterdam T 31(0)104152426 F 31(0)104154953 Before printing, think about the environment. -----Oorspronkelijk bericht----- Van: emc-p...@ieee.org [mailto:emc-p...@ieee.org] Namens John Woodgate Verzonden: Thursday, December 22, 2011 7:30 PM Aan: EMC-PSTC@LISTSERV.IEEE.ORG Onderwerp: Re: Semi-Anechoic Chamber Question - Correction Factor In message <4ef37136.5070...@earthlink.net>, dated Thu, 22 Dec 2011, Cortland Richmond <k...@earthlink.net> writes: >On 12/22/2011 9:27 AM, John Woodgate wrote: >> If the direct and reflected rays are equal amplitude and in phase, >>then it's +6 dB; if they are at 180 degrees, it's minus infinity dB. >>In between you can get any value, depending on relative phase and >>transmission loss. > >Equal amplitude only occurs if the direct and reflected paths are the >same distance. A 3 meter OATS can never meet that condition. If the >source and antenna are at 1 meter height, the reflected path is 3.6 >meters long My explanation, including 'If', was in the context of doubt between 3 dB and 6 dB. Your further information is relevant, but doesn't invalidate what I wrote. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK Some people who are peeling the finch of the financial crisis are thinking of biting a rook. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>