Ahoy, me hearties!
My view is that there are too many standards that are too cheap at this site, and if ANSI were really powering it, they would be doing so from their own site. This site might as well hoist high the Jolly Roger, because its occupied by pirates. Ex.: UL 60950-1 for $20 instead of $422? BS EN 60950-1 for $20 instead of £161 to BSI Members, £322 to non-members? DON GIES ALCATEL-LUCENT SENIOR PRODUCT COMPLIANCE ENGINEER BELL LABS - GLOBAL PRODUCT COMPLIANCE LABORATORY 600-700 Mountain Avenue Room 5B-104 Murray Hill, NJ 07974-0636 USA Phone: +1 908 582 5978 Fax: +1 908 582 0582 don.g...@alcatel-lucent.com MEMBER, ALCATEL-LUCENT TECHNICAL ACADEMY From: Crane, Lauren [mailto:lauren.cr...@kla-tencor.com] Sent: Monday, May 07, 2012 5:29 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: e-standard.org "The cheapest standards in the world" Does anyone have experience with the subject standards vendor. Their prices are so low (NFPA 70-2011 for $25!?) it has activated all my if its too good to be true warning systems. Regards, Lauren Crane KLA-Tencor - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>