All, What is the defined sequence of test voltages when performing testing to EN 61000-4-5 per a family standard that says use the procedure in EN 61000-4-5.
For example when doing a 2 kV Lines to Earth, 1 kV Line to Line test on AC power, is it specified what steps must be used for this test. In other words should I test at 500V, 1000V and 2000V for line to ground and 500V, 1000V from line to line. Or should only 2000V Line to Ground and 1000V line to line, or something different, like 500V, 1000V, 1500V, 2000V for example. We have always done the three steps, but now looking through the 2006 edition of the standard, I cannot find where it states what steps should be used. I know there a couple of family standards that say just the two maximum voltages, but was just wondering? Any guidance or pointers is appreciated. Thanks in advance. Larry K. Stillings Compliance Worldwide, Inc. Test Locally, Sell Globally! FCC - Wireless - Telecom - CE Marking 357 Main Street Sandown, NH 03873 (603) 887 3903 Fax 887-6445 www.complianceworldwide.com <www.complianceworldwide.com> Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of my firm shall be understood as neither given nor endorsed by it. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>