It sounds as if they are saying other non-magnetic metals, such as brass. Ken Javor Phone: (256) 650-5261
From: Derek Walton <lfresea...@aol.com> Date: Tue, 5 Jun 2012 11:26:32 -0400 (EDT) To: <emc-p...@ieee.org> Subject: EN61000-4-8 Folks, I have a question about Section 7.2 of this document. Specifically, what metal is permissible for use as a GRP. The wording of the standard is: "The ground plane shall be a non-magnet metal sheet ( copper or aluminum ) of 0.25 mm minimum thickness; other metals may be used but in this case they shall have at least 0.65 mm minimum thickness." So, does this mean that magnetic metals can be used if they are over 0.65 mm? Presumably then the concern is saturation of very thin sheets? Sincerely, Derek Walton L F Research - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>