Given that is is a magnetic field immunity test, I would guess that any ferrous metal that would affect/distort the magnetic field would not be desired. I would be willing to bet that the standards people had that in mind, and meant that any magnetic metal should not be used. Also note that the GRP for a table-top test is not longer required. I asked the question a while back about why the GRP was specified in the first place, and why it was taken out in the latest release of the standard, and never did get an informed answer. I may have gotten a rather colorful tongue-in-cheek response from Mr. Woodgate, however. :-) Bob R.
--- On Tue, 6/5/12, Derek Walton <lfresea...@aol.com> wrote: From: Derek Walton <lfresea...@aol.com> Subject: Re: EN61000-4-8 To: j...@jmwa.demon.co.uk, EMC-PSTC@LISTSERV.IEEE.ORG Date: Tuesday, June 5, 2012, 1:41 PM Hi John, Yes I agree it's open to interpretation.... Can anyone on the list that partook please give me insight? Thank you! Derek. -----Original Message----- From: John Woodgate <j...@jmwa.demon.co.uk> To: EMC-PSTC <EMC-PSTC@LISTSERV.IEEE.ORG> Sent: Tue, Jun 5, 2012 11:11 am Subject: Re: EN61000-4-8 In message <8cf1146b86de5cb-1a0c-d...@webmail-stg-d14.sysops.aol.com>, dated Tue, 5 Jun 2012, Derek Walton <lfresea...@aol.com> writes: >So, does this mean that magnetic metals can be used if they are over >0.65 mm? It's just not clear. Perhaps someone who was involved in writing the standard can help. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk Instead of saying that the government is doing too little, too late or too much, too early, say they've got is exactly right, thus throwing them into total confusion. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>