The answer is yes - each province has an electrical code mandated by law and a set of the certification marks which are recognized within that province. In additional, Canada Occupational Health and Safety Regulations SOR/86-304, Clause 8.3 mandates compliance of electrical equipment with the Canadian Electrical Code. In Canada the number of the electrical equipment safety standards is C22.2 Part. which refers to the Canadian Electrical Code Part 2 (Part 1 being the equivalent of the NEC in the US). The specific regulation / legislation mandating the marks which are acceptable would vary from province to province but in effect the same agencies are generally accepted across all provinces of Canada. Prior to being accepted as a certifying agency in any province, the organization would have to be accredited either by SCC or by an equivalent agency deemed acceptable to the provincial authorities.
Tom Smith, P.Eng Product Safety and Approvals Consultant TJS Technical Services Inc. Tel: +1 403-612-6664 Email: tsm...@tjstechnical.com http://tjstechnical.com <http://tjstechnical.com/> Follow us on Twitter: TJS_Technical From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Jim Hulbert Sent: November-01-12 2:35 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Are Product Safety Certifications Mandatory in Canada? In the U.S., there are OSHA regulations that require electrical apparatus used in the workplace be certified to U.S. standards by one of OSHA's Nationally Recognized Test Laboratories (NRTL's). Is there a similar regulation in Canada that requires electrical apparatus used in the workplace be certified by one of the Standards Council of Canada approved test laboratories to Canadian standards? Jim Hulbert Pitney Bowes _____ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>