Our engineers are working on an AC Mains Distribution PCB. Like most electronic devices, we have seen the damage caused by lightning strikes. So we are increasing our creepage and clearance distances as wide as we can and still meet other requirements.
But no matter what spacing you design to, there is a lightning bolt out there that will exceed the design and it will arc somewhere. So the question came up to whether it makes sense to deliberately make a weak spot, or an area where the clearance is slightly smaller to control where a lightning/surge pulse will arc and/or discharge, like a Spark-Gap. I have seen spark-gap lay outs on PC boards on I/O connectors; usually for ESD protection, but not on AC Mains. Is this a bad bad idea or something worth doing? Pros and Cons? Other suggestions?? Thanks to all for your help. The Other Brian ________________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>