Hello Ian - In combining the test standards do you mean methodology or limits or both? ICES 003 has different limits to the FCC published limits - so be aware of that. For the test methods refer to the other emails in the thread.
From: Ian McBurney [mailto:ian.mcbur...@allen-heath.com] Sent: Tuesday, September 17, 2013 9:35 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] USA & Canada rf emission test standards Dear Colleagues; I am trying to combine FCC 47 CFR part 15 and Canadian ICES-003:2012 radiated rf emission testing for a digital device that is an unintentional radiator. However; looking into the test standards for each country I am getting perplexed. It appears that for 47 CFR part 15 sub part B, the test standard for compliance is ANSI UL C63.4 2003 whereas for Canada it is the latest edition that is acceptable which I believe is the ANSI UL C63.4 2009. Similarly; if I was to apply the CISPR 22 method then CFR47 part 15 recognises the third edition of CISPR 22 and Canada applies the 6 edition 2008. Is there a common set of standards that can be applied for radiated & conducted rf emission measurements that is acceptable in both the USA & Canada? I am carrying out measurements from 30MHz to 2GHz to class B limits. Many thanks in advance. Ian McBurney Design & Compliance Engineer. Allen & Heath Ltd. Kernick Industrial Estate, Penryn, Cornwall. TR10 9LU. UK T: 01326 372070 E: ian.mcbur...@allen-heath.com<mailto:ian.mcbur...@allen-heath.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net<mailto:emcp...@radiusnorth.net>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>