EN 60204-1:2006 and EN 60950-1:2006 define requirements for the use of those symbols (and the two are not entirely consistent). So if you are applying those standards I'd assume the symbol usage will still apply as stated until those standards are revised, regardless of what the IEC does.
-Dave From: Scott Xe [mailto:scott...@gmail.com] Sent: Wednesday, April 01, 2015 10:19 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Earth symbols required in clause 7 marking & instructions of EN 60335-1 The standard calls for IEC 60417 for the symbols. Currently there are 3 symbols to serve different purposes. 1. IEC 60417 - 5017: General earthing 2. IEC 60417 - 5018: Functional earthing 3. IEC 60417 - 5019: Protective earthing 5017 is being proposed to be withdrawn according to IEC discussion result and suggest not to be used. In UK, 5018 shall not be used to indicate a functional earthing conductor according to the notes of IEC 60417. What was happening for UK not to use 5018? Is there any replacement for UK? Thanks and regards, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>