Being familiar with 60950-1 I can tell you there are no Canadian/USA deviations on markings. I would definitely request the NRTL to provide the clauses reference in the standard and to share their Design manual which should help to resolve the issue.
Rodney Davis ________________________________ From: John Cochran <jcoch...@strongarm.com> Sent: Tuesday, December 15, 2015 1:37 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Internal connection labels in 220VAC systems Recently a customer has corrected the markings of terminal blocks inside of an industrial control panel my company built. An NRTL has evaluated the system and says the terminal markings for Line (L), Neutral (N), and Ground (G) are incorrect for a 220VAC input condition. Their evaluation says that N is incorrect and should be labeled (L2) and the Line as (L1). I agree that this is technically corrected for a North American wired 220VAC input as it consists of 2 live wires, each 110VAC. For international use, 220VAC is only on one leg (L) and the return is (N). This system is capable of handling 90-240VAC single-phase input, but the customer has been instructed by the NRTL that for 110VAC input the terminals should be marked L/N/PE, and for 220VAC input the terminals should be marked L1/L2/PE. This would require different construction for North America and International use. Do I have an argument that the NRTL has made an incorrect assessment? Thanks, John Cochran Strongarm Energy Division STRONGARM Designs 423 Sargon Way, Horsham, PA 19044 Ph: 215-443-3400 x219 Fax: 215-443-3002 jcoch...@strongarm.com<mailto:jcoch...@strongarm.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> ________________________________ NOTE: This e-mail (including any attachments) is for the sole use of the intended recipient(s) and may contain information that is confidential and/or protected by legal privilege. Any unauthorized review, use, copy, disclosure or distribution of this e-mail is strictly prohibited. If you are not the intended recipient, please notify Mitel immediately and destroy all copies of this e-mail. Mitel does not accept any liability for breach of security, error or virus that may result from the transmission of this message. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>