On Fri, 27 May 2016 21:37:01 +0000, MARINA PEYZNER <epeyz...@sbcglobal.net> wrote:
> I am confused with Note below the Table 9 in IEC 61000-1-2 Ed. 4 standard. > I am under impression that we have to create Immunity test levels given in > this Table with placing antenna at a distance of 0.3 m but this is in > contrary with this Note. > So, what should be the distance between antenna and EUT ? Maybe do you mean IEC 60601-1-2? Anyway, in IEC 61000-4-3 in general, prefered distance is 3 m but the distance may be reduced down to 1 m. Unless otherwise specified, the requirement will be applied to standards which use IEC 61000-4-3 test method. Regards, Tom -- Tomonori Sato <vef00...@nifty.com> URL: http://t-sato.in.coocan.jp - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>