On 2/27/2017 7:15 AM, Price, Andrew (Leonardo, UK) wrote:
... customer has requested an extended magnetic field emission test over the range 100kHz to 2MHz with a limit defined in dBpT. The antenna to be used is an EMCO 6512 which has it correction factors provided in dBS/m which the emission software used does not recognise. So is there a conversion factor that enables the right correction factor to be entered or is the conversion factor only used once a result is obtained??
What Ed Price said. Take a look at http://www.ets-lindgren.com/manuals/6512.pdf page 30 for the 6512 and page 33 for the equation. Send along a copy of the correction factors from your antenna's chart with the difference between the two curves and an explanation that the software apparently does not accommodate other units)
Cortland Richmond - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
