Andrew, Thanx for the pointer to this proposed comprehensive
Brexit update to the UK Legislation. This was a lot of work pulling this
together. Hopefully it will be used to provide a smooth transition from the
present CE marked equipment to the new UK marking.
I searched it thoroughly for the new replacement marking for CE
(UK marking) and primarily found a reference to some other legislation; nowhere
did I find a symbolic representation for the marking.
So the actual marking seems still in doubt. I still like my
combo approach – ukCEeu – which brings the requirements together in the same
way that the usNRTLc marking does for North America.
However, Gert’s unique proposal seems intriguing; the letters
UK could be shown in the Bowler Hat but I would insist on maintaining the
mustache.
:>) br, Pete
Peter E Perkins, PE
Principal Product Safety & Regulatory Affairs Consultant
PO Box 23427
Tigard, ORe 97281-3427
503/452-1201
IEEE Life Fellow
<mailto:p.perk...@ieee.org> p.perk...@ieee.org
From: Andrew Wood <andrew.w...@ametek.com>
Sent: Thursday, January 17, 2019 2:28 AM
To: Pete Perkins <peperkin...@cs.com>; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] Brexit requirements for UK manufacturers.
Just to clear up a bit of confusion (whilst staying well clear of politics)
The link given by Scott ie
http://www.legislation.gov.uk/ukdsi/2019/9780111176368/schedule/25
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.legislation.gov.uk_ukdsi_2019_9780111176368_schedule_25&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=i2G28X6nRmu5NWsp2BqoPi-SQ-PTVzJhYy74n0hoUzg&e=>
Is to the 619 page draft legislation, but the link takes you straight to
Schedule 25 which is for the ATEX information.
Using the navigation options you can open the entire document as a web page or
pdf.
The aim of this document is a quick fix in the event of no further deals or
agreements.
It is a document to amend a series of existing regulations and makes the bare
minimum changes.
For ATEX, Schedule 25 amends the Equipment and Protective Systems Intended for
use in Potentially Explosive Atmospheres Regulations 2016.
The 28 pages of changes can be summarised as:
* Harmonised standards (published in the OJ) become Designated standards
approved by the Secretary of State
* Notified Bodies become Approved Bodies (and the Nando database is
replaced by a UK equivalent)
* EU Declaration of Conformity drops “EU” to become a Declaration of
Conformity
* CE mark is replaced by UK mark.
There are various other minor logical changes referring to instructions being
in English etc and generally changing references from EU to UK.
The basic structure and approval process seems to be as close as practical to
the existing requirements.
A very quick look suggests that there are similar changes for the following
Regulations that might be of interest:
Machinery Safety in Schedule 12
EMC in schedule 20
LVD in schedule 23
Pressure equipment in schedule 24
Radio equipment in schedule 29
The deal rejected earlier this week relates to the withdrawal agreement, which
aimed to establish a transition period (so that for example the UK would carry
on using the CE mark and the EU Notified Bodies would keep their status etc etc
in return for a series of rights and obligations on both sides)
The 619 draft legislation is the default position (for product safety etc) if
there is nothing else decided in the meantime.
Andy
Best Regards,
Andrew Wood
Compliance Manager - Hazardous Areas
Visit the NEW SPOT Thermometer website at www.spotthermometer.com
<http://www.landinst.com/products/viralert-fever-screening-system/overview>
LAND Instruments International | Stubley Lane, Dronfield, Derbyshire, S18 1DJ,
England
DDI: +44 (0)1246 581592 | E-mail: <mailto:andrew.w...@ametek.com>
andrew.w...@ametek.com| Web: www.landinst.com <http://www.landinst.com/>
From: Pete Perkins <00000061f3f32d0c-dmarc-requ...@listserv.ieee.org
<mailto:00000061f3f32d0c-dmarc-requ...@listserv.ieee.org> >
Sent: 16 January 2019 19:47
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] Brexit requirements for UK manufacturers.
***NOTICE*** This came from an external source. Use caution when replying,
clicking links, or opening attachments.
Scott et al,
I haven’t read the 600+ UK legislation report (which was
apparently rejected this week in the Parliament) but I am searching for the new
UK marking – perhaps ukCEeu?
:>) br, Pete
Peter E Perkins, PE
Principal Product Safety & Regulatory Affairs Consultant
PO Box 23427
Tigard, ORe 97281-3427
503/452-1201
IEEE Life Fellow
<mailto:p.perk...@ieee.org> p.perk...@ieee.org
From: Scott Xe <scott...@gmail.com <mailto:scott...@gmail.com> >
Sent: Wednesday, January 16, 2019 5:57 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] Brexit requirements for UK manufacturers.
Hi Ian,
Your assumption is correct but may have more than your thought. You can read
the following draft for greater detail.
http://www.legislation.gov.uk/ukdsi/2019/9780111176368/schedule/25
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.legislation.gov.uk_ukdsi_2019_9780111176368_schedule_25&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=i2G28X6nRmu5NWsp2BqoPi-SQ-PTVzJhYy74n0hoUzg&e=>
I have learnt that recently the UK government published draft Regulations of
619 pages in case of no deal Brexit. Unfortunately, I could not locate it yet.
Hope other team mates can help to explore greater info.
Thanks and regards,
Scott
Sent from Mail
<https://urldefense.proofpoint.com/v2/url?u=https-3A__go.microsoft.com_fwlink_-3FLinkId-3D550986&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=tNgLpR60YYVpkOf-LesloJ5ciMT0fkI6ChjUwtZLiE4&e=>
for Windows 10
From: McBurney, Ian <mailto:ian.mcbur...@allen-heath.com>
Sent: Wednesday, 16 January 2019 08:55 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: [PSES] Brexit requirements for UK manufacturers.
Dear Colleagues.
I have been waiting for some firm guidelines as to what will be the
requirements for UK manufacturers after 30th March 2019
but so far nothing has been published by the relevant authorities.
>From my understanding, if the UK leaves the EU without an agreement, the UK
>will be outside the EU and there are different requirements for UK based
>manufacturers.
I believe the existing manufacturers Declaration of conformity documents will
still be valid but that a nominated representative in the EU will now be
required. We plan to nominate our distributor in the EU (i.e. Germany) as the
importer to satisfy this requirement.
Please can you let me know if my assumptions are correct?
Thanks in advance.
Ian McBurney
Lead Compliance Engineer
Allen & Heath Ltd.
Kernick Industrial estate,
Penryn,
Cornwall. TR10 9LU. UK.
Tel: 01326 372070
Email: ian.mcbur...@allen-heath.com <mailto:ian.mcbur...@allen-heath.com>
Allen & Heath Ltd is a registered business in England and Wales, Company
number: 4163451. Any views expressed in this email are those of the individual
and not necessarily those of the company.
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=Kdikgj4UdfsWn5VQN0Xu4x4t-3swU6-rPVMc8VxFUfs&e=>
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/
<https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=nfKx0qwp2mS2U5HO6O832Ftyqsz0XbmlpqpLiImssRk&e=>
can be used for graphics (in well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=vM57mykdDK9jqiQbgMSesu-MBGu14aS9KuO3f3fAhNs&e=>
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=xkXNAEAmEeD4fKWJnUSIOIdFtHvF_Zuxpa6DZ9IA0OM&e=>
List rules: http://www.ieee-pses.org/listrules.html
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=oj7pvON9FqHU4juBAwZq_JI-uMc2R0Mz4bG81LeZsMQ&e=>
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> >
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> >
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=Kdikgj4UdfsWn5VQN0Xu4x4t-3swU6-rPVMc8VxFUfs&e=>
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/
<https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=nfKx0qwp2mS2U5HO6O832Ftyqsz0XbmlpqpLiImssRk&e=>
can be used for graphics (in well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=vM57mykdDK9jqiQbgMSesu-MBGu14aS9KuO3f3fAhNs&e=>
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=xkXNAEAmEeD4fKWJnUSIOIdFtHvF_Zuxpa6DZ9IA0OM&e=>
List rules: http://www.ieee-pses.org/listrules.html
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=oj7pvON9FqHU4juBAwZq_JI-uMc2R0Mz4bG81LeZsMQ&e=>
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> >
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> >
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=Kdikgj4UdfsWn5VQN0Xu4x4t-3swU6-rPVMc8VxFUfs&e=>
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/
<https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=nfKx0qwp2mS2U5HO6O832Ftyqsz0XbmlpqpLiImssRk&e=>
can be used for graphics (in well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=vM57mykdDK9jqiQbgMSesu-MBGu14aS9KuO3f3fAhNs&e=>
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=xkXNAEAmEeD4fKWJnUSIOIdFtHvF_Zuxpa6DZ9IA0OM&e=>
List rules: http://www.ieee-pses.org/listrules.html
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=DwMFaQ&c=4Wq-glnrtRfJm80jXLZl8g&r=SutJAoHIYf-NiICmGTlfKdUzkvlvaPBEJjZuVg06iyw&m=TAMR-N5xXLQ8ntY-TivCpWr5EtO670o5pxOvEwVKlw4&s=oj7pvON9FqHU4juBAwZq_JI-uMc2R0Mz4bG81LeZsMQ&e=>
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> >
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> >
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>
