Correct. Mommas kitchen is not acceptable place to testđ SDOC requirements are listed in KDB896810D01 SDoC v01r01. There are also general requirements for any testing of unintentional devices that must be met. For exampleâ While an accredited lab is not required. Section 15.31(a)(4) reminds the party responsible that testing of any unintentional radiator is to be done IAW C63.4 (excluding certain sections). This section also instructs that, if using the alternate method of 15.109(g)(2) must also be tested using C63.4 C63.4:2014 requires that any testing performed to its method must meet the NSA requirements; also, measurement antennas must be calibrated to meet the requirements of C63.5 latest edition and the site, must also follow the requirements for site validation etc. So, while not requiring to be listed or accredited, the test site must be able to show that it meets all of the stated requirements. Thanks
Dennis Ward This communication and its attachements contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient(s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. Usage of PCTEST email addresses for non-business related activities is strictly prohibited. No warranty is made that the e-mail or attachments(s) are free from computer virus or other defect. Thank you. From: Michael Derby <micha...@acbcert.com> Sent: Tuesday, February 5, 2019 3:15 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] UK Gov Using The UKCA Mark Anyone with a test site that meets the requirements of ANSI C63.4. âș Michael. From: Charlie Blackham [mailto:char...@sulisconsultants.com] Sent: 05 February 2019 10:52 To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: Re: [PSES] UK Gov Using The UKCA Mark Glyn For sDoC... there is no requirement to be accredited, nor listed on the FCC website. So, anyone can do sDoC testing. Regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: www.sulisconsultants.com<https://outlook.hslive.net/owa/redir.aspx?C=02be3bf3e3a544d1bdf7b6c99fbd12f5&URL=http%3a%2f%2fwww.sulisconsultants.com%2f> Registered in England and Wales, number 05466247 From: Payne, Glyn <00000d283c0acebb-dmarc-requ...@listserv.ieee.org<mailto:00000d283c0acebb-dmarc-requ...@listserv.ieee.org>> Sent: 05 February 2019 10:41 To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: Re: [PSES] UK Gov Using The UKCA Mark Hi John, Wonât the lack of a MRA with the US effect the FCC SDoC route when getting emission scans done in labs that are accredited by UKAS? Regards, Glyn Payne Validation and Compliance Engineer Solid State Logic - UK Headquarters www.solidstatelogic.com<http://www.solidstatelogic.com/> Facebook<https://www.facebook.com/SolidStateLogic.SSL/> : Twitter<https://twitter.com/solidstatelogic> : Youtube<https://www.youtube.com/user/SSLvideos> 25 Spring Hill Road | Begbroke | Oxfordshire | OX5 1RU | UK t: +44 1865 664894 | m: +44 7989 163937 From: John Woodgate <j...@woodjohn.uk<mailto:j...@woodjohn.uk>> Reply-To: John Woodgate <j...@woodjohn.uk<mailto:j...@woodjohn.uk>> Date: Tuesday, 5 February 2019 at 10:23 To: <EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>> Subject: Re: [PSES] UK Gov Using The UKCA Mark Goods arriving in the UK should not be in trouble. UK recognizes the CE Mark on March 29 and there is no reason to stop recognizing it on March 30. Goods leaving the UK for the EU are in a different position IF a UK-only Notified Body is involved in determining compliance. For many products, there is no need for Notified Body involvement, and many Notified Bodies are not UK-only but widely-based in the western world. This scenario applies only if there is a 'no-deal' Brexit, and in that case it is up to the UK and EU to decide independently what marking to accept and for how long. We can hope that common sense will prevail, but it might not. Best wishes John Woodgate OOO-Own Opinions Only J M Woodgate and Associates www.woodjohn.uk<http://www.woodjohn.uk> Rayleigh, Essex UK On 2019-02-05 09:59, Scott Xe wrote: I fully agree on the Ken's concern. How can the manufactures change the logos and relevant documents of the goods arrive in the UK post Brexit of 30/03/2019? UK will suffer short of goods in next few months. Does UK plan to cope with it? Regards, Scott On Tue, 5 Feb 2019 at 01:51, Kapur, Ken <ken.ka...@thermofisher.com<mailto:ken.ka...@thermofisher.com>> wrote: Hi John, These new requirements with the UKCA mark will be a significant burden on industry, if a MRA can be established, it would help significantly. There are still lotâs of questions about the UKCA marking and how it gets implemented. Considering a no-deal Brexit: getting any relabeling to happen will definitely take a lot of time. Hopefully, there will be no new testing and existing standards would be accepted. Will there be an 18 month transition? Will there be a different set of requirements for products shipping EU to UK versus from other countries? Best Regards, Ken Kapur Director, Compliance Thermo Fisher Scientific Mobile: 408-685-1454 From: John Woodgate [mailto:j...@woodjohn.uk<mailto:j...@woodjohn.uk>] Sent: Monday, February 04, 2019 8:42 AM To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: Re: [PSES] UK Gov Using The UKCA Mark CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. We need to get a Mutual Recognition Agreement as soon as possible. I'm surprised that the UK Gov document doesn't even mention the possibility. It ought to be very easy, because on March 28 the UK NBs were accredited to EU and they didn't suddenly become incompetent on March 29. The problem is pure petty bureaucracy (and spite!). Best wishes John Woodgate OOO-Own Opinions Only J M Woodgate and Associates www.woodjohn.uk<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.woodjohn.uk&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=8_tiH1iTW2cHAy2l5CyW_ij_WM6U5wSf2lOHCIK2Pq4&e=> Rayleigh, Essex UK On 2019-02-04 14:37, Mark Bailey wrote: All, Just received the following link from a colleague, using the UKCA marking if the UK leaves the EU without a deal. Links to part of the â[PSES] Brexit requirements for UK manufacturersâ a couple of weeks ago. https://www.gov.uk/government/publications/prepare-to-use-the-ukca-mark-after-brexit/using-the-ukca-marking-if-the-uk-leaves-the-eu-without-a-deal<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.gov.uk_government_publications_prepare-2Dto-2Duse-2Dthe-2Dukca-2Dmark-2Dafter-2Dbrexit_using-2Dthe-2Dukca-2Dmarking-2Dif-2Dthe-2Duk-2Dleaves-2Dthe-2Deu-2Dwithout-2Da-2Ddeal&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=i0ZXkM9Zmf_uujamKeIAx-RjkvLqyIk-_gK7VzLTpqw&e=> BR Mark Bailey IMPORTANT NOTICE: This e-mail message is intended to be received only by persons entitled to receive the confidential information it may contain. E-mail messages to clients of Telensa may contain information that is confidential and legally privileged. Please do not read, copy, forward, or store this message unless you are an intended recipient of it. If you have received this message in error, please forward it to the sender and delete it completely from your computer system. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=lyHQtGZtx-DPWUgZnkLTRdEThyhUfO0E21vLQycICeI&e=> Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=f8iEw1AFPKkOdZJ6Ok317Yf3Og3TjDA8h8H4Fw_-d_4&e=> can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=GDbYnYJ7wFzf7LwMb5Pd8FsHTRetfovBINcXEbBHn_M&e=> Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=6tvz9PUp-gYjXsPX8Yod-i5A0PKaXLRxapuMvEOtB4g&e=> List rules: http://www.ieee-pses.org/listrules.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=RyU9SSGZF8Nl00WahndllEcsHEC_eqg6Do_RWucl_Lw&e=> For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=lyHQtGZtx-DPWUgZnkLTRdEThyhUfO0E21vLQycICeI&e=> Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=f8iEw1AFPKkOdZJ6Ok317Yf3Og3TjDA8h8H4Fw_-d_4&e=> can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=GDbYnYJ7wFzf7LwMb5Pd8FsHTRetfovBINcXEbBHn_M&e=> Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=6tvz9PUp-gYjXsPX8Yod-i5A0PKaXLRxapuMvEOtB4g&e=> List rules: http://www.ieee-pses.org/listrules.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=DwMD-g&c=q6k2DsTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=ceEGfRfAATRLvrDpw-fh33haojLMnxrxQT1JC9iGxE0&m=hVktUUt1U8CsKszyFHFBIEja8xbn-HQ9G9Rz7WpP_xM&s=RyU9SSGZF8Nl00WahndllEcsHEC_eqg6Do_RWucl_Lw&e=> For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> Red Lion 49 Ltd T/A Solid State Logic Registered as a limited company in England and Wales (Company No:5362730) Registered Office: 25 Spring Hill Road, Begbroke, Oxford OX5 1RU, United Kingdom - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>