Hi Frank,
Could you use a spring clip like this in series with the earthing conductor to permit easy disconnection and reconnection? https://www.wago.com/gb/installation-terminal-blocks-and-connectors/compact-splicing-connector/p/221-412 https://www.wago.com/gb/installation-terminal-blocks-and-connectors/compact-splicing-connector/p/221-612 I love these connectors and use them all around the lab All the best James James Pawson Managing Director & EMC Problem Solver Unit 3 Compliance Ltd EMC : Environmental & Vibration : Electrical Safety : CE & UKCA : Consultancy <http://www.unit3compliance.co.uk/> www.unit3compliance.co.uk | <mailto:[email protected]> [email protected] +44(0)1274 911747 | +44(0)7811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 From: Frank Tang <[email protected]> Sent: 16 June 2022 20:23 To: [email protected] Subject: [PSES] Removable door panel grounding Hi All, In the past we have typically done a stud and nut grounding for removable lift-off access panels, but this is an inconvenience to disconnect the ground cable. What are other methods for grounding large panel doors (3ft x 7ft) if any? -- Thank you and best regards. - Frank - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 -- This email has been checked for viruses by AVG. https://www.avg.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
