Hi Ryan, If the national adoption of the IEC standard contains modifications, you need a CB report that approves compliance with these national deviations. According to the Australian Standards website, IEC 60320-1 has been adopted there with national modifications (AS/NZS 60320.1-2012 - Standards Australia<https://www.standards.org.au/standards-catalogue/sa-snz/electrotechnology/el-004/as-slash-nzs--60320-dot-1-2012>). Unfortunately, I do not have the AS/NZS edition of this standard and do not know the content of these modifications. Sometimes, such modifications are mentioned in the international IEC edition: For example, IEC 60335-1:2020 mentions in the foreword that 0,5 mm² supply cords are not allowed for class I appliances in Australia and New Zealand. My experience with national deviations in other AS/NZS standard has been that such modifications may be only editorial (e.g. replacing references to other IEC standards by reference to AS/NZS standards which in turn are equivalent or identical to their IEC counterpart), but sometimes also technical (e.g. specific requirements for supply voltage and frequency to be used for testing). Therefore, you should request evidence from your appliance inlet supplier that the inlet complies with AS/NZS 60320.1. Alternatively, you (or your supplier) could purchase a copy of the AS/NZS edition: If the national deviations are not relevant for your inlet, you may try to convince your local NRTL to accept your plug as compliant with AS/NZS 60320.1. Kind regards, Bernd
Von: Ryan Jazz <rjayasin...@yamahaguitargroup.com> Gesendet: Montag, 17. April 2023 22:36 An: EMC-PSTC@LISTSERV.IEEE.ORG Betreff: [PSES] Are Australia/New Zealand approvals needed for IEC 60320 Appliance Inlet ? [EXTERNAL E-MAIL] This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender. Dear list members, We are trying to get a CB Report for our guitar amplifier from our local NRTL. For the Australia/New Zealand deviations they are asking us to provide an ‘Australia/NZ’ approval document for the appliance inlet. Is this a new requirement, I always thought Australia/New Zealand accepts IEC approvals. If it is a new requirement does anyone know the regulation name or standard number. Thank you, Sincerely, Ryan Jazz Ryan Jayasinghe Regulatory Compliance Engineer rjayasin...@line6.com<mailto:rjayasin...@line6.com> "After silence, that which best expresses the inexpressible, is music" - Aldous Huxley LINE6 26580 Agoura Road Calabasas CA 91302 line6.com ampeg.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 ________________________________ WILO SE Wilopark 1, 44263 Dortmund Amtsgericht Dortmund, HRB 21356 www.wilo.com Vorstand/Executive Board: Oliver Hermes (President & CEO), Dr. Patrick Niehr, Georg Weber, Mathias Weyers Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Lars Roßner Dieses Dokument ist vertraulich zu behandeln. Die Weitergabe sowie Vervielfaeltigung, Verwertung und Mitteilung seines Inhalts ist nur mit unserer ausdruecklichen Genehmigung gestattet. Alle Rechte vorbehalten, insbesondere fuer den Fall der Schutzrechtsanmeldung. This document has to be treated confidentially. Its contents are not to be passed on, duplicated, exploited or disclosed without our expressed permission. All rights reserved, especially the right to apply for protective rights. Datenschutz ist uns wichtig! Daher gehen wir sorgsam mit Ihren Daten um. Näheres finden Sie in unseren Datenschutzhinweisen<https://wilo.com/de/de/Wilo-Deutschland/Datenschutzhinweise.html>. Sollten Sie keinen Kontakt mehr mit uns wünschen, wenden Sie sich bitte an datensch...@wilo.com<mailto:datensch...@wilo.com>. Data Protection is important to us! Therefore we handle your data carefully. Please find the details in our Note on Data Protection<https://wilo.com/de/de/Note-on-data-protection.html>. If you do not wish to stay in touch with us anymore, please write to data-priv...@wilo.com<mailto:data-priv...@wilo.com>. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1