Be careful. Appliance connectors are AU Level 3 equipment <https://www.eess.gov.au/registration/registration-in-scope-electrical-equipment/level-3/>. You can find the full list in AS/NZS 4417.2 <https://www.standards.govt.nz/shop/asnzs-4417-22020/>.
On Tue, Apr 18, 2023 at 9:27 AM Ryan Jazz <rjayasin...@yamahaguitargroup.com> wrote: > Hello List Members, > > An update that the NRTL withdrew their request for the “Australia/NZ” > approvals document for the appliance inlet > > The IEC certificate was acceptable. > > Sincerely, > > Ryan Jazz > > Ryan Jayasinghe > > Regulatory Compliance Engineer > > rjayasin...@line6.com > > > > "After silence, that which best expresses the inexpressible, is music" - > Aldous Huxley > > > > LINE6 > > 26580 Agoura Road > > Calabasas CA 91302 > > line6.com > > ampeg.com > > > > *From:* Ryan Jazz > *Sent:* Monday, April 17, 2023 1:36 PM > *To:* emc-p...@ieee.org > *Subject:* Are Australia/New Zealand approvals needed for IEC 60320 > Appliance Inlet ? > > > > Dear list members, > > We are trying to get a CB Report for our guitar amplifier from our local > NRTL. > > For the Australia/New Zealand deviations they are asking us to provide an > ‘Australia/NZ’ approval document for the appliance inlet. > > Is this a new requirement, I always thought Australia/New Zealand accepts > IEC approvals. > > If it is a new requirement does anyone know the regulation name or > standard number. > > Thank you, > > Sincerely, > > Ryan Jazz > > Ryan Jayasinghe > > Regulatory Compliance Engineer > > rjayasin...@line6.com > > > > "After silence, that which best expresses the inexpressible, is music" - > Aldous Huxley > > > > LINE6 > > 26580 Agoura Road > > Calabasas CA 91302 > > line6.com > > ampeg.com > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> > ------------------------------ > > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > -- Scott Aldous | Regulatory Compliance Manager | scottald...@google.com | 650-253-1994 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1