Does anyone have any documentation (or even a story) on why the changes between MIL-HDBK-237B (1997) and 237C (2001) were so drastic? 237B filled a sorely missed gap in terms of how the DIDs were explained and described. It seems to be the most recent document to actually talk through the expectations for an E3IAR. And the last one to talk about EMC Control Plans in any detail. ADS-37A-PRF has a full appendix describing an E3IAR, but it was a year before 237B was released. Why did C drop all of this helpful context? 237C genuinely seems like it could be an entirely separate document, and it seems odd that they went through the effort of deleting so much of rev B.
Any suggestions for clues I could follow to paint the picture? Thanks everyone! Michael Viau - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to EMC-PSTC@LISTSERV.IEEE.ORG All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/emc-pstc@listserv.ieee.org/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: msherma...@comcast.net Rick Linford at: linf...@ieee.org For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1