I posted a letter halui.program.run? I got one reply from Manfredi and I tried
what he mentioned but I'm still hung up
can a hardware switch be linked through halui to button.program-run or
halui.program.run or am I wasting everyone's time?
I'm trying to pull the pin low,is it expecting a high signal from the pin?
seems like someone has done this if its doable
Help!
I've tried many variations (still no success)
I move HALUI= halui up under [HAL]
instead of halcmd in the ini
that's where it was in the sample configs ini didn't seem to make a difference
added
newsig runsignal bit
net runsignal parport.1.pin-12-in-not halui.program.run
to the standard_pin_out.hal file
when I use hal show it shows the signal linked to the parport but doesn't show
it linked to halui.program.run
like iocontrol.0.
example
signals
type value name
bit false feedhold
<== iocontrol.0.tool-change
==>parport.1.pin-11-in-not
signals
type value name
bit false runsignal
==>parport.1.pin-12-in-not
is all that shows in the signals for runsignal it doesn't seem to get tied to
halui.program.run like iocontrol.0.tool-change does.
on the wiki site there is some docs showing hardware panel interfacing but no
mention of cycle start
anyone have any suggestions
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
