I just run a % sign at the start and end of my programs, nothing else Andy Jon Elson wrote: > Andy Holcomb wrote: > >> Okay, I am making a request/plea. >> >> Refresher, I loaded up EMC2 after running BDI for about 3 or 4 years >> and I use TkEMC (because I like it!!!). After running my first program >> EMC2 reset my offsets to what the machine started at. So I asked the >> group why is it that BDI didn't do this and how come I can't use the >> right click on the axis to set the offset. The jist of the answer I got >> was "because thats not proper edict". >> > One trick is to not have an M02 at the end of the program. This > gets a warning message, but doesn't reset the offsets. I think > you can reinstate the offsets with G92.3. > > Jon > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > >
------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
