Hello,
i just started using EMC2 and things are looking well.
I added some X and Y linit switches to the parallel port 0, pin 10 and 11. The 
problem is that they are active low switches (gnd when pressed, 5V when open). 
I can't seem to make EMC2 recognise this.
 
I tried this:
 
newsig Xlimits bit
setp parport.0.pin-10-invert TRUE
linkps parport.0.pin-10-in => Xlimits
linksp Xlimits => axis.0.neg-lim-sw-in
linksp Xlimits => axis.0.pos-lim-sw-in
 
However, I get a "parameter or pin setp parport.0.pin-10-invert"  not found 
error.
 
What can I do ?
 
Regards,
 
Ronald Wijngaarde

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to