Do you get this behavior with one of the "sim" configurations (e.g.,
sim/axis.ini, sim/tkemc.ini)? What is the exact sequence of operations
you do (key presses, button clicks, etc) to make this happen? If you
are not running the newest version of emc2 (2.1.5), does the problem
still occur after you have upgraded?
Based on your description of the problem, I loaded sim/axis.ini and did
the following actions:
F1 F2 (turn machine on)
o cds.ngc <RETURN> (load gcode file)
r (begin running gcode file)
F1 (estop)
F1 F2 (turn machine on again)
At this point, the machine is still not moving. Is there some
difference between these steps and the steps you are performing?
Jeff
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
