At 10:54 AM 7/17/2007, you wrote: >On Tue, Jul 17, 2007 at 10:24:59AM -0500, RogerN wrote: > > > > My File menu has Open, Reload, Properties, and Quit. I tried editing my > > .tbl file last night and reloaded, but my offsets did not change. I > > then exited and restarted EMC2 and the tool offsets were updated. > >My mistake. In versions 2.1.x "Reload tool table" is on the Machine >menu. > > > I'm touching off my tool 1 to an X and Z position and seting it to zero. > > Then I set each tool to the same X and Z and write down the displayed > > position. Next I open my .tbl file, edit the length and diameter, save. > > Is this the normal procedure for tool offsets? Is there another way? > >There are many ways I'm sure! Sounds reasonable enough to me.
Is there a reload for the parameter table, the work offsets in particular? __________ Andre' B. Clear Lake, Wi. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
