Hi, The Mesa card looks interesting. Do you use it with the SoftDMC Digital Motion Control Firmware? What drivers do you use for the servo motors?
Gerhard -------- Original-Nachricht -------- > Datum: Wed, 5 Sep 2007 08:42:38 -0500 > Von: "RogerN" <[EMAIL PROTECTED]> > An: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Betreff: Re: [Emc-users] Need advice on building a mill controller with EMC2 > Your setup sounds very much like my Anilam setups. Tach feedback to > drives, encoder feedback to controller, +&-10V velocity command signal > from controller to drive. I used a Mesa 5i20 ($199) and 7i33 ($69), I > also use a 7i37(69) for I/O. I was originally looking at the Motenc > Lite card but the Mesa hardware saved me a good deal of $ and works > great. > > RogerN -- GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS. Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
