On Thu, Oct 04, 2007 at 10:14:24PM -0400, Patrick Ferrick wrote: > > Here's where it gets weird. AXIS indicates that Y is at -3.00, not 0 after > this sequence. Despite the MIN_LIMIT being 0, I can jog it between -3.00 > and 1.00 (a distance of 4, which seems to relate to the distance between > MIN and MAX.) So it's like the "ruler" that EMC2 is using on this axis is > mis-adjusted to the physical axis, and I can't figure out how to shift it. > > I'm pretty sure that I'm overlooking something obvious, but I've banged my > head enough on it...I think I need somebody else to look at it and > straighten me out! Thanks very much. > > regards, > Pat
I think your homing is fine and you have some offset you've forgotten about. You could have this because you set it with "touch off", or various other ways. This is a new wiki page that I think is really useful for understanding the various offsets. See especially #3 for clues about your problem. http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?CoordinateSystems ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
