Unfortunately, it is not possible to run gcode subroutines from MDI mode. I hope to fix that in the future.
That would let you do things like: O<find_center> call in the mdi window. Ken [EMAIL PROTECTED] Mark Kenny Products Company, LLC 55 Main Street Voice: (888)ISO-SEVO (888)476-7386 Newtown, CT 06470 Fax: (203)426-9138 http://www.MarkKenny.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of John Thornton Sent: Friday, November 09, 2007 8:46 AM To: emc-users@lists.sourceforge.net Subject: [Emc-users] Run Macro in Axis My friend was telling me how the HAAS he is looking at can run macros to find hole center and edges etc. Can something like that be done in EMC? I know you could load a G file to do that but a press of the button would be faster. Thanks John ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
