On Sat, 2007-12-08 at 13:27 -0800, Kirk Wallace wrote: > As part of running AXIS on a remote PC, I am trying to run the standard > EMC 2.2.2 with an NFS mount from my file server to /home/kwallace/emc2. > As kwallace, I can read and write to the emc2 directory without any > problems. I emptied the directory, invoked EMC and selected sim/axis > from the local sample directory. EMC then asked if I wanted to copy the > configuration to my home. I agreed and EMC created the proper > directories and copied the files. So now I have the sim/axis > configuration on the NFS mounted directory. The configuration screen > then disappears and EMC tries to start. After a few minutes I get this > error report: > > http://www.wallacecompany.com/machine_shop/EMC2/remote_axis_error.txt > > I suspect that parts of EMC run as root and root can't access the NFS > mount, but when I "sudo su -" and try to access files > in /home/kwallace/emc2, I have no problem.
> When I try to access NFS > mounts from my Fedora system I get "permission denied". I lied here. I can access the emc2 mount from my Fedora box as root. I think because I don't have root squash active for emc2 in exports. > Any ideas? > -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending) ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
