On Monday 10 December 2007, Kirk Wallace wrote: >On Fri, 2007-12-07 at 14:15 -0800, Kirk Wallace wrote: >> I would like to run AXIS remotely. I wrote some notes: >> >> http://www.wallacecompany.com/machine_shop/EMC2/remote_notes.html >> >> to help me keep things sorted out. I am going to give it a try, but if >> anyone has comments or corrections, please let me know. Thanks. > >I got the .ini and .nml files sorted out and was able to get tkemc >working. Both the server and client screens match when selections are >made on either computer. If I try to run AXIS, both screens come up, but >E-stop and On buttons don't have any effect. Is AXIS known to work with >a remote GUI? Are there any known issues with running AXIS on a remote >GUI setup?
I have not observed that effect here, Kirk. It (axis) works just fine when imported via an ssh -X session here as long as I remember to do an "xhost +address.of.remote.machine" here after starting x on this box. -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) The trouble with money is it costs too much! ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
